KIVO FR double portrait – Special design
| Application | Flat roofs |
| Anchoring | Anchoring to the roof |
| Material | Cold roll-formed pre-galvanized steel profiles according to EN 10147 – S320 + Z, or post galvanized steel profiles, according to EN ISO 1461:2009 |
| Tilt Angles | Upon demand from 5 to 30 degrees |
| Panel Arrangement | double portrait |
| Module Compatibility | Framed modules, all available commercial types |
| Average Installation Rate | Up to 20 kWp/man per day |
| Accessories | Aluminum middle and end-clamps: EN AW-6063 T66 |
| Connection Type | Grade 8.8 (galvanized) M12 and M8 (clamps) according to DIN933, 125, 9021, 985, 912 EPDM rubber against Electrolytic corrosion |
| Warranty | 20 years |
| Manufacturing Location | Depending on the location of the installation site |
NORM & STANDARDS
Eurocode 1:
Actions on structures (EC1, ENV 1991 1-1, 1–3, 1-4),
- Part 1-1: General actions – Densities, self-weight, and imposed loads – Part 1-3: General actions – Snow loads
- Part 1-4: General actions – Wind actions
Eurocode 3:
Design of steel structures (EC3, ENV 1991-1-1, 1-3)
- Part 1-1: General rules and rules for buildings
- Part 1-3: General – Cold formed thin gauge members and sheeting
- Part 1-8: General – Design of joints
- Part 1-10: General – Material toughness and through thickness assessment
Eurocode 8:
Design of structures for earthquake resistance (EC8, ENV 1998-1-1) -Part 5: Foundations, retaining structures and geotechnical aspects -Part 1: General rules, seismic actions and rules for buildings -National Norms for Earthquake Resistance
Other Regional Standards where Eurocodes not applicable.
